Spyder Electra with EYE (2009)

Overall Rating
Average Ratings (from 1 ratings)
Overall Rating
Quality
Value
Features
1 positive – 0 negative

 

The ’09 generation Spyder Electra with Eye is back with a vengeance. The new design concept features a reduced overall profile (25% weight & 15% length). The Electra with Eye comes standard equipped with the LEAP™ circuit board developed by Tadao® Technologies providing unsurpassed speed and reliability. Outfitted with Spyder’s “Synergy Engineered Technology” the Electra with Eye operates on dual air sources (CO2 & Compressed Air) at 300PSI low operational pressure. This all aluminum constructed powerhouse will out perform every other marker in its class.

Performance Features

  • LEAP™ Circuit Board with Rear Facing Color Access Mode Display (CAMD) Developed by Tadao® Technologies
  • “Synergy Engineering” Low Pressure Dual Air Source System
  • Break Beam Eye (Anti-Chop System)
  • Aluminum Eye Covers
  • 3 Modes of Operation (Semi-Auto, Ramp PSP, & Ramp Millennium)
  • Fast Charge Inline Regulator
  • Vented Pressure Relief On/Off CA Adapter
  • Reduced Overall Profile (25% Lighter and 15% Shorter)
  • Up to 25 BPS Rate of Fire
  • Steel Braided Hose Line
  • Quick Release Delrin Bolt
  • 12″ Two Piece Micro Ported Barrel
  • Twist Lock Clamping Feedneck
  • 3-Way Adjustable Magnetic Response “Saber” Trigger
  • All Aluminum Constructed Body
  • Recessed Dual Texture Grip Panels
  • All Aluminum Trigger Frame with Integrated Dove Tail
  • Standard CA Thread Vertical Adapter
  • Compatible with a Spyder 9.6v Rechargeable Battery or a Premium 9v Alkaline Battery
  • External Velocity Adjuster
  • 300 PSI Operational Pressure
  • Operates on CO2 or Compressed Air
Spyder Electra with EYE (2009)3.916666666671
PaintballSpyder Electra with EYE (2009)The ’09 generation Spyder Electra with Eye is back with a vengeance. The new design concept features a reduced overall profile (25% weight & 15% length). The Electra with Eye comes standard equipped with the LEAP™ circuit board developed by Tadao® Technologies providing unsurpassed speed and reliability. Outfitted with Spyder’s “Synergy Engineered Technology” the Electra with Eye operates on dual air sources (CO2 & Compressed Air) at 300PSI low operational pressure. This all aluminum constructed powerhouse will out perform every other marker in its class

, ,


User Reviews/Comment

One user review of Spyder Electra with EYE (2009)

  1. Atomicvole Feb 21, 2012 at 3:58 pm #
    Did you find this review helpful? Yes   No

    I own this item: Yes

    Quality
    Value
    Features

    Theis page is actually showing the 2008 Spyder Electra. The 2009 had a clamping feed neck that will need a hex key to tighten.

    I Love mine, the only upgrade you will need for this is a Tadaou board, and Musahi 7 chip. You only need that if you ahve to set your BPS lower than 15. The Leap boar hasSemi, PSP ramping and Melinium Ramping – Ramping tops out at about 15BPS.

    It is pretty loud and your opponent will know when you are coming for them!!

    It is an entry level marker, and does not need any upgrades so save the money and get a better marker someday when you need to have it. Until them this thing, with a little oil now and again, and spare orings on hand, will keep mowing them down.

    I use mine for entry level and rookie tournamentss, have upgraded them to Tadau Boards, M7 chips and 14 inch CP Classic Barrels with .693 bores. About 50 bucks in upgrades, I got my Electras online used and needing repair from 30 to 50 bucks. With the money I saved on these I was able to by quality Masks, Hopper and tank, that will stay with me if I should ever need to upgrade.


Post a review or comment!

Click stars below to rate.
Quality
Value
Features
I own this item